- +86-15002143242
- 618 Shangcheng Rd, Pudong Xinqu, Shanghai, China.
17-4 stainless steel casting
17-4 PH Stainless Steel Casting | INVESTMENT CASTING
17-4 PH Stainless Steel (SAE type 630 stainless steel), is the martensitic precipitation-hardened stainless steel casting grade. Typical usage of 17-4 stainless steel castings is where high strength and a modest level of corrosion resistance is required.
17-4PH Precipitation Hardening Stainless Steel-Casting ...
Stainless steel 17-4 PH (UNS J92180), Type 630, is a chromium-nickel-copper precipitation-hardening martensitic stainless steel with an addition of niobium. 17-4 PH combines high strength and hardness with good corrosion resistance. 17-4 is a common named used by two or more producers, not a trademark.And it's not official material grade name too.
17-4 PH Stainless Steel Investment Casting - OH
17-4 PH Stainless Steel Investment Casting Hardenable Stainless. ALLOY / SPECIFICATION ANNEALED HARDENED CHARACTERISTICS; 17-4 / AMS 5355: 36 Rc: 34-44 Rc: Corrosion resistant / Machinable: 410 / CA15: 100 Rb: 94 Rb-45 Rc: Good hardness and corrosion resistance: 416 / AMS 5349 IC 416: 100 Rb: 94 Rb-45 Rc: Better machinability than 410:
Physical and mechanical properties of cast 17-4 PH ...
@article{osti_6607517, title = {Physical and mechanical properties of cast 17-4 PH stainless steel}, author = {Rack, H. J.}, abstractNote = {The physical and mechanical properties of an overaged 17-4 PH stainless steel casting have been examined. The tensile and compressive properties of cast 17-4 PH are only influenced to a slight degree by changing test temperature and strain rate.
Stainless Steel - Grade 17-4 (UNS S17400)
Grade 17-4 stainless steel can be cold worked using common techniques in spite of its high initial yield strength. Annealing. Grade 17-4 stainless steel is annealed at 1038°C (1900°F) for 0.5 h followed by cooling rapidly. Hardening. Grade 17-4 stainless steel has high ductility, and can be formed using all conventional techniques.
17-4 Stainless Steel | 630 Alloy
17-4 Precipitation Hardening also known as Type 630 is a chromium-copper precipitation hardening stainless steel used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius). General Properties
PDF Casting Material: Precipitation-Hardening Stainless Steel ...
Alloy 17-4PH (UNS S17400), Type 630, is a chromium-nickel-copper precipitation-hardening martensitic stainless steel with an addition of niobium. 17-4PH combines high strength and hardness with good corrosion resistance. 17-4 is a common named used by two or more producers, not a trademark. And it's not official material grade name too.
7 Things you DID NOT know about 17-4 PH Stainless Steel ...
Type 17-4 PH stainless steel contains between 15-17.5% of chromium in its composition. In this regard, a seagoing vessel's pump and valve parts are made of type 17-4 PH stainless steel. Most of the parts of that ship that you went on that annual cruise are made from type 17-4 PH stainless steel.
PDF Stainless Steel AL 17-4™ Precipitation
AL 17-4 Precipitation Hardening Alloy is comparable to that of Type 304 stainless steel in most media. In gen-eral, the corrosion resistance of AL 17-4 alloy is supe-rior to that of the hardenable 400 series stainless steels. As with other precipitation hardening alloys, AL 17-4 Pre-cipitation Hardening Alloy is more susceptible to stress
17-4PH Precipitation Hardening Steel | AMS 5643 | Smiths ...
17-4PH Precipitation Hardening Stainless Steel. An American aerospace grade stainless steel that contains 4% copper and may be hardened by a single low temperature precipitation hardening heat treatment, producing excellent mechanical properties at a high strength level.
17-4 PH Stainless Steel Casting | Stainless Steel Casting
17-4 PH Stainless Steel is the most widely used stainless steel casting alloy of all the precipitation-hardening stainless steels. It contains approximately 15-17.5% chromium and 3-5% nickel, as well as 3-5% copper.
17-4 PH vs 316 Stainless Steel Casting | INVESTMENT CASTING
SS316 and 17-4 PH are common used two types of stainless steel grades for investment casting. 316 is typical austenite stainless steel casting grade, while 17-4 PH stainless steel is precipitation hardening material grade, which are all defined in American standards.When you compare Stainless Steel 17-4 ph vs 316 for casting, it is obvious that 17-4 PH has the higher hardening content.
Stainless Steel Investment Castings | Investment Castings
Material 17-4: Stainless Steel Castings, ... A stainless steel casting must have low carbon content to perform well in corrosive environments. Thus, higher carbon content will improve the performance of heat-resistant grades in high temperature situations and improve their strength.
A Complete Guide to Stainless Steel | Metal Casting Resources
Cast stainless steel is made by pouring liquid metal into a molding container with a specific shape. Wrought stainless steel starts out at a steel mill, where continuous casters make stainless into ingots, blooms, billets, or slabs. These raw manufacturing materials must then be shaped by further work.
Alloy Shrinkage Factors for the Investment Casting of 17 ...
The physical and mechanical properties of an overaged 17-4 PH stainless steel casting have been examined. The tensile and compressive properties of cast 17-4 PH are only influenced to a slight ...
Copyright © 2020 JUMBORAX Steel Castings
Add an Inquiry